Resource Library

Auburn University applies HyperWorks to Optimize the Design of Composite Suspension Components and Monocoque for a SAE Formula Student Racecar

To optimize the car performance, the Auburn University SAE Racing Team focused on selected components that were most promising in terms of mass reduction with equal or increased stiffness. HyperWorks enabled them to reduce component mass-to-stiffn...

Customer Stories

HyperWorks Enables Ingeniacity to Reduce Mass of Sailing Yacht Composite Bowsprit by 65%

Altair's HyperWorks Suite provided the pre-processing, optimization and FE-solving tools to help create a new bowsprit design that was 34kg lighter than the previous model

Customer Stories

Mabe

The consumer goods industry is fast paced and highly competitive, with designs becoming increasingly complex while the timeline for production shrinks. Companies like Mabe must innovate and develop new products quickly in order to remain on the co...

Customer Stories

CEVT Discuss Multi-Disciplinary Optimization for Vehicle Development

China Euro Vehicle Technology (CEVT) discuss the application of Multi-disciplinary Optimization (MDO) during the development of new automotive vehicle architectures.

Customer Stories, Video Testimonials

Adam Wais of Rolo Bikes Discusses the Working Relationship with Altair

During the development of a new carbon fiber bicycle, the design team at Sweden based Rolo Bikes, wanted to develop a frame which exhibited world leading strength and stiffness attributes while keeping weight to an absolute minimum. The team requi...

Customer Stories, Video Testimonials, Videos

Gator Motorsports

Gator Motorsports utilized Inspire to redesign its brake pedal, as well as suspension bell cranks. This resulted in increased stiffness and a reduction of weight.

Customer Stories

Top Use Cases: ProteusDS

Presentation introducing a few of the top use cases for the dynamics analysis software, ProteusDS.

Customer Stories

Top Use Cases: ShipMo3D

Presentation introducing a few of the top use cases for the time and frequency domain analysis software, ShipMo3D.

Customer Stories

Success Story: OHB System AG

HyperWorks and the Altair Partner Alliance Streamline Development Process of Optical Satellite Components at OHB System AG.

Customer Stories

Top Use Cases: SimData Manager

Presentation introducing a few of the top use cases for the simulation data management software, SimData Manager.

Customer Stories

Politecnico di Milano University

The Politecnico di Milano University implemented generative design software to quickly and easily identify the ideal shapes and materials for three architectural design concepts.

Customer Stories

Using Topology Optimization with solidThinking Inspire for Improved Casted Rail Compoments

A simulation driven approach was taken using solidThinking Inspire for topology optimization, Evolve for shape refinements and HyperWorks for FE analysis for the optimization of an existing component design to be manufactured with casting/AM techn...

Customer Stories

APWorks Choses OptiStruct for Topology Optimisation for the 3D Printed Light Rider

Despite its skeletal appearance, the Light Rider is an extremely strong yet lightweight electric motorcycle designed by Airbus subsidiary APWorks as a showcase of what’s possible when OptiStruct's topology optimisation is coupled with metallic 3D printing.


Written by Tanya Weaver from DEVELOP3

Articles, Customer Stories

A Vision of Tomorrow's Architechture: Designing the LAVA Bionic Tower

Exploring design variants with OptiStruct's FE-based topology optimization to generate a free-form exoskeleton structure

Customer Stories

Technische Universität Dresden

The team at Technische Universität Dresden used Altair Inspire to redesign a Formula Student steering column mount that saved 35% of the weight and is produced with additive manufacturing.

Customer Stories

Developing a New Safety System for the Rail Industry with Sharma & Associates

Sharma & Associates (SA), a Chicago-based consulting firm that is focused on providing engineering solutions to the railroad industry, led the effort. Since 1995, SA have delivered safe, effective and efficient solutions to its customers, which in...

Customer Testimonials, Videos

Achieving Superior Crash Performance for the Souest DX7

Analysis and optimization to improve crash performance while reducing reliance on physical tests.

Customer Stories

Optimization-driven Product Development at Volvo

Harald Hasselblad (PhD) - Senior Analysis Engineer at Volvo Car Group Sweden - talks about introducing an Optimization Culture Arena to support simulation driven development in his company.

Customer Stories

Biberach University of Applied Science, Institute for Architecture and Urban Development

Create modern, functional, stiff, and light architectural designs. Altair OptiStruct used to create feasible designs

Customer Stories

AMETEK

AMETEK utilized model-based development to develop a new embedded control system for a aerospace suit  chiller unit under a very tight schedule and high safety standards.

Customer Stories

HyperWorks Becomes Part of Mechanical Engineering Curriculum at Dalhousie University

As a key industry tool, HyperWorks becomes part of the Curriculum, providing hands-on training to Mechanical Engineering Students at Dal

Customer Stories

Texas Instruments

Using Altair Embed, Texas Instruments was able to develop an embedded simulation of an entire system.

Customer Stories

Robot Bike Co.

Developing a Fully Customizable, Additively Manufactured Mountain Bike

Customer Stories

Implementing CAE into the Design Process for Composite Tennis Racquets at Wilson Sporting Goods

Wilson Labs, the innovation hub at Wilson Sporting Goods, leveraged OptiStruct and Altair ProductDesign for composites finite element analysis to reduce design cycle time and enhance product value.

Customer Stories

Hyundai Mobis Automotive Group Improves the EMC Analysis Process from 2D to 3D Using FEKO for Shielding Effectiveness Simulation

To analyze and optimize the shielding effectiveness of the housing in an Around View Monitor (AVM) while meeting EMC requirements, Hyundai MOBIS automotive group improves the Electromagnetic Compatibility Analysis (EMC) process from 2D to 3D using...

Customer Stories

Airbus Helicopters

Airbus Helicopters Weight & Balance (W&B) team is tasked with collecting and analyzing data to forecast the weight of a product during the conceptualization phase. Collecting useful and up-to-date data in a standardized way from this wide group of...

Customer Stories

Application of FEKO in EM Protection Design for Electromagnetic Effects of Civil Aircraft

In the limited space of a plane, a lot of radio equipment, especially antennas are installed, leading to concerns about antenna pattern distortion caused by the plane body and inter-antenna isolation.

COMAC, Shanghai Aircraft Design and Research Institute continues selecting FEKO to improve the

Customer Stories

Ford Battery Group Adopts RADIOSS Cut Methodology

In order to improve the simulation and accuracy of a high fidelity battery CAE model. Ford has turned to the cut methodology available in RADIOSS.

Customer Stories

VTT Optimises Industrial Valve Block for Additive Manufacturing

Reprint of the article published on Metal AM - vol. 2 no. 1 Spring 2016

Customer Stories

Thales Alenia Space

Companies from across a wide range of industries are attempting to find the potential impact that additive manufacturing (AM) could have on design and manufacturing processes. During its own efforts to explore AM and its potential for space satell...

Customer Stories

Bremar Automotion uses Altair RADIOSS to Design & Certify FIA Motorsport Roll Cages

“The Altair product is it for us in terms of simulation. That’s all we use. It’s great to be able to show such good correlation between the simulations and physical testing, and to have confidence in not only our approach, but also the Altair prod...

Customer Stories

Korea Meteorological Administration Implements Cost-saving Innovations for Electricity Usage with PBS Professional and AcuSolve

“PBS Professional has been a very reliable workload manager for our large, complex supercomputing systems… Cray and Altair are supercomputing leaders in the weather and climate modeling industry, and we are more than happy to have collaborated for...

Customer Stories

Characterization of Sensorless Motor Control Technology Using VisSim

“A key benefit to using VisSim for this project is its code generation capability and how quickly and fast it works. The speed of how its drivers work and being able to interface directly with our ROM code was really the key enabler for me, and th...

Customer Stories

Optimized Design for 3D Printed Valve Block Sheds Weight, Size and Gains Improved Performance

Not every component or product is suitable
for 3D printing, depending on its size, form
and design as well as the quantity needed.
A valve block is very suitable for 3D printing
and has a high potential for improvement in
weight, performance, and design freedom
when additively manufactured.

Customer Stories

Composite Rotor Blade Analysis using Altair HyperWorks

As part of a senior design project – the design and analysis of a coaxial rotor craft –
Christopher Van Damme, at the time of the project senior undergraduate student within the
department of Engineering Mechanics at the University of Wisconsin-Madison, had to analyze
a composite made helicopter

Customer Stories

Getting it right the First Time; how FE-Simulation with RADIOSS supports Sigma Connectivity in Streamlining the Development Process

Simulation is extensively used in the
early development phases at the Sigma
Group, where about 10-15 engineers are
working with different types of simulations.

Customer Stories

Structural Design of Concrete Shells in Seismic Areas Using HyperWorks

Challenge: Structural optimization to design expressive structures that can safely
be employed in seismic areas

Altair Solution: Investigate shell structures

Customer Stories

Application of HyperWorks to Develop Human Body Models to Assess Injury Potential for Vulnerable Populations in Vehicle Crashes

The effects of obesity on occupant responses
in frontal collisions were investigated using
the UMTRI whole-body human finite element
models. A modeling approach was developed
and applied that allowed for rapid change of a
baseline human body model into geometries
representing adults with diffe

Customer Stories

The SKA Radio Telescope: A Global Project for a Better Understanding of the Universe

Challenging Einstein’s seminal theory of
relativity to the limits, how the very first
stars and galaxies formed just after the Big
Bang, the study of dark energy and the vast
magnetic fields in the cosmos, and the age
old question “Are we alone in the Universe?”
These are some of the key scien

Customer Stories

SOGECLAIR Aerospace Employs HyperWorks to Optimize Additively Manufactured Aircraft Components: Topology optimization of a large engine pylon structure

To find new development and manufacturing approach to reduce weight while ensuring safety, HyperWorks offers SOGECLAIR Aerospace an innovative, streamlined development environment with more design freedom, faster development cycles, and lower cost...

Customer Stories
363 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!