Resource Library

Increasing Robustness and Reliability of a Race Car Engine with AcuSolve

This study is part of Prodrive’s implementation of AcuSolve to enhance its CFD capability after many years of outsourcing these simulations.

Customer Stories

Optimal Design Exploration Using Global Response Surface Method: Rail Crush

As design exploration and optimization methods have become commonly accepted across a range of industries, such as aerospace, automotive or oil and gas, they are frequently utilized as standard practice to efficiently produce designs and aid criti...

Customer Stories

Accurate Simulation Modelling of Sports Impact Scenarios using HyperWorks

One of the key research activities within the institute is concerned with the development of enhanced human surrogate models for sports personal protective equipment (PPE) research. Impact surrogates are used to provide a representation of a livin...

Customer Stories

Rolo Bikes

Rolo Bikes approached Altair ProductDesign due to its familiarity with the HyperWorks suite and expertise in the application of CAE techniques to optimize carbon fiber structures. The objective of the program was to optimize a new bike frame to ac...

Customer Stories

Studio-X

Studio-X and Tokyo DIGITAL use topology optimization to improve structural optimization and enhances building performance while reducing assembly time and material waste with lightweight design. 

Customer Stories

Computational Analysis of Quadriceps Tendon Force Following Total Knee Replacement Surgery Leads to Improved Patient Knee Flexure

Anterior knee pain is a significant complication following total knee arthroplasty (TKA) surgery. The inability to freely extend/flex the knee has a crucial influence on patients daily activities including walking, lifting and rising from a chair....

Customer Stories

Failure Criteria for Stamping Analysis in Radioss

In this paper, several failure criteria are compared in their ability to predict necking point and failure propagation during a forming process. The paper has been presented at the 2014 IDDRG Conference in Paris, France.

Customer Stories

CAE Technology Applicable to the Aerospace Industry - JEC Reprint

In this article, published on the May 2014 issue of JEC Composites Magazine, Shan Nageswaran explains why the latest version of HyperWorks® represents the most advanced evolution of computer-aided engineering (CAE) technology applicable to the aer...

Customer Stories

HyperWorks helps ACENTISS in the development of Elias, a new electrically powered ultra-lightweight airplane

Recently, ACENTISS has developed the all-electric technology demonstrator ELIAS (Electric Aircraft IABG ACENTISS) based on the one-seater UL aircraft ELECTRA ONE from PC-AERO GmbH.
To perform all the needed engineering and development work of the project ACENTISS applied Altair’s HyperWorks suite.

Customer Stories

Tesla Optimizes CAE - Desktop Engineering Reprint

Automating CAE connectors creation in HyperMesh and utilizing HyperStudy for pedestrian impact simulation helped optimize Tesla’s design cycle and get better crash and safety performance.

Customer Stories

Luxon Engineering Applies Optimization-driven Design to Motocross Components

The motorcycles used in motocross racing demand light weight and high strength components in order to gain a performance advantage over the competition. In this video testimonial Billy Wight, President of Luxon Engineering, presents a case study o...

Customer Stories, Video Testimonials

Intel Solution Brief: Maximize Performance and Scalability of Radioss on Intel® Xeon® Processor E7 v2 Family-Based Platforms

This paper summarizes the findings of a benchmark study with Radioss and Intel® Xeon® processors. In the study, Altair benchmarked Radioss using a modified crash simulation model on a single-node platform -- Radioss was able to easily take advanta...

Customer Stories

SEGULA Technologies optimizes its enterprise IT investment using Altair’s software asset optimization solution

Industry
Engineering Service Provider

Challenge
Need to handle and monitor a very large variety of commercial software licenses and to optimize the software usage.

Altair Solution
License monitoring delivering information about the actual scope of software usage with Altair’s SAO solution,

Customer Stories

Reducing Weld Distortion by 93% with HyperStudy

Gestamp Tallent Ltd is a world class designer, developer and manufacturer of cutting edge, chassis structural and suspension products, body in white structures, modules and systems for the automotive industry. Gestamp used the BMW MINI front subfr...

Customer Stories

Scania Customer Story

Squeak and rattle phenomena are studied in the automotive industry in an attempt to reduce the cabin noise and as a result, give a better ride quality and comfort to occupants. In the case of Scania’s Cabin Development Department, this kind of sim...

Customer Stories, Videos

HyperWorks provides flexibility and agility to development processes of Engineering Services Provider Beta Epsilon

Beta Epsilon designs racing cars and offers engineering. Beta Epsilon offers component and vehicle meshing, FEA analysis of metal and composite components, crash test simulation, optimization, and CFD simulation. Beta Epsilon uses HyperMesh, OptiS...

Customer Stories

Reducing Weight and Maximising Fuel Efficiency of a Formula Student Car with OptiStruct

Durham University Electric Motorsport (DUEM), are a UK-based team of students who design, build and race electric vehicles. In this project, DUEM wanted to demonstrate how they have applied the latest weight saving technology to achieve a faster, ...

Customer Stories

Aircraft Carrier Alliance

Creating a Structurally Efficient Design for the Queen Elizabeth Class Aircraft Carrier

When making key decisions at the concept and preliminary design phases of a naval ship project, the designer is often obliged to work with limited data on the major structural design drivers for the

Customer Stories

Northwestern University Success Story

Using HyperWorks for Teaching Computational Optimization Methods in Engineering Design at Northwestern University

Customer Stories

HyperWorks Virtual Wind Tunnel on Cray: Benchmarks and Recommended Configurations

With Altair’s HyperWorks Virtual Wind Tunnel running on Cray XC30 or CS300 systems, manufacturers of all sizes can now predict a vehicle’s external aerodynamic performance without the need for numerous physical wind tunnel tests. This document inc...

Customer Stories

Using Analysis to Innovate with New Materials

Analysis and optimization tools enable Samsung engineers to reduce the cost of appliances without sacrificing performance.

By Beverly A. Beckert
Concept to Reality Winter 2013 Subscribe to C2R Magazine

Customer Stories

When Engineering Intuition is Not Enough

A new technology helps design engineers quickly create dramatically lighter structures — and better understand the effects of material placement in whatever they’re developing.

Customer Stories

Simulation Tools: Driving the Future of Design

The Clemson University Deep Orange 3 program introduced future engineers to analysis software, enabling them to develop a novel sports car concept architecture.

By Dr. Paul Venhovens
Concept To Reality Winter 2013

Customer Stories

BASF Enlightens the Auto Industry

Continuous fiber-reinforced thermoplastic composite and virtual simulation technology enables BASF to develop an innovative and cost-neutral seat pan that is 45% lighter than its predecessor.

By Beverly A. Beckert
Concept To Reality Winter 2013 a href="http://www.altair.com/

Customer Stories

Toyota Motorsport

Controlling Software Costs with Altair’s Software Asset Optimization System

TMG chose Altair’s Software Asset Optimization (SAO) system to address this problem. SAO (Software Asset Optimization) enables the user easy and efficient access of the actual software usage of existing lic

Customer Stories

DSM Success Story

Thermal Analysis of LED Lamps using AcuSolve

Customer Stories

DeWalt Optimizes Power Tools with HyperWorks

The development of modern electric power tools requires special attention to be simultaneously paid to both the efficiency and user comfort of the tool, as well as the robustness and durability of the devices. For the fulfillment of these two grou...

Customer Stories, Video Testimonials

Case Study Sogeclair

Case Study about Sogeclair's use of HyperWorks

Industry: Aerospace interiors

Challenge: Development of new flooring concept to fix the cabin seats while realizing a lighter structure, adjustable panels for all types of aircraft, and an easier installation and
maintenance.

Altair Solution:

Customer Stories

Success Story: M.TEC

M.TEC Engineering Continues to Benefit and Yield New Business Due to Advantages of the Altair Partner Alliance (APA)

Customer Stories

LG Electronics Success Story

LG Electronics Performs Smartphone Drop-Test Simulation in Less than 24 Hours with New Automated Approach

Customer Stories

ルノー

Carmakers the world over are investing heavily in the development of lighter vehicles and more economical engines that can go further on less fuel. Renault’s powertrain division wanted to further decrease the weight and increase the performance of...

Customer Stories

Panasonic Ecology Systems Shortens Development Time of Indoor Air Quality Products by Applying Virtual Product Validation with HyperWorks

They began by drop-testing
a single component, then moved on to
a combination of several components,
an assembled product and a packaged product. At each step, the team employed Altair’s RADIOSS solver to calculate the drop-test impact.

Customer Stories

Toyota Motorsport GmbH uses Altair‘s SAO System to better control software costs in its commercial Software tools

License monitoring delivering information about the actual scope of software usage with Altair’s SAO solution, improving decisions on software renewal and acquisition.

Customer Stories

PBS Professional Wins at NCI Raijin, Largest Supercomputer in Southern Hemisphere

Australia’s National Computational Infrastructure (NCI) chose PBS Professional to manage workload for its ‘Raijin’ cluster from Fujitsu, the largest supercomputing system in Australia with over 1000 users.

Customer Stories

HyperWorks Optimization Capabilities Integrated into Packaging Design Process Help Unilever Cut Costs and Development Time

Unilever reduced the time required for
simulation and significantly lowered costs
by working with Altair HyperWorks suite
of computer-aided engineering tools.

Customer Stories

Railcar Manufacturer Speeds Design Modifications with HyperWorks

American Railcar Industries, headquartered
in St. Charles, Mo., designs and manufactures
commercial railroad cars, producing
every part of the car above the wheels.
Customers use the company’s railcars to
transport all sorts of liquid and solid raw
materials, including oil, coal, cement, sand,

Customer Stories

Polaris Reduces Weight of Snowmobile Structures Up to 40% with solidThinking Inspire and OptiStruct

Polaris, based in Roseau, Minn., is a
renowned manufacturer of snowmobiles,
and its Snowmobile Chassis Structures
Group is engaged in design and testing that supports three different platform teams with chassis solutions for each set of requirements. Computer-based design and finite element (FE)

Customer Stories

Creactive Design

Using Optimization to Improve the Design of a Classroom

Product design consultancy and structural engineering partner, Creactive Design, wanted to explore the possibility of utilizing optimization technologies to improve the design of a cross-functional roof for an innovative new c

Customer Stories

HyperWorks Enables Global Appliance Manufacturer to Use New Material for Stronger, Lower-Cost Product

To qualitatively and quantitatively analyze the stress on the door cover during thermal expansion and contraction, the engineers used HyperMesh, a high-performance finite element pre-processor and RADIOSS, a modern structural analysis and optimiza...

Customer Stories

Samsung Uses OptiStruct to Redesign Washing Machine Component for Optimized Weight and Material Usage

To carry out optimization on the pulley, Suzhou Samsung chose OptiStruct, a key
component of Altair’s HyperWorks suite of computer-aided engineering tools and a
modern structural analysis and optimization solver. “OptiStruct provided us with important optimization features,” said Mr. Cheng, “such

Customer Stories
359 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!